Floors and subfloors treated

Borer Treatment Melbourne | Floors and Subfloors, 7 Days

Tiny holes and fine dust under your floorboards? Our borer treatment Melbourne team checks and treats affected timber the same day. Call 0477 559 658 for a free quote.

Call 0477 559 658
Borer exit holes and tunnels in old timber floorboards
freeQuoteon the phone
Booked 7 daysSame day where we have a slot

Get your borer treatment price

Tell us where you see the holes and your suburb. We call you back with your price.

  1. 1Tell us the pest
  2. 2We ring with your price
  3. 3Booked, same day where we can

Sent straight to our booking line. We ring you back, you decide.

Your price

Borer treatment pricing

Every borer job is different, from one pine cupboard to a whole subfloor. We ask a few questions, then price your wood borer treatment on the phone or after a quick look.

Freequote on the phone, and your price is locked before we book.
  • Borer inspectionActive borer confirmed and the affected timber mappedPrice on call
  • Subfloor timber treatmentJoists, bearers and the underside of floorboardsPrice on call
  • Roof timber treatmentExposed pine framing in the roof voidPrice on call
  • Termite inspection, same visitWorth doing while we are under the floorPrice on call

Starting prices, not fixed prices. Your exact price is confirmed on the phone before we book, once we know the job.

  • We look through the whole place, roof void and yard included, before anything is sprayed
  • The treatment is matched to the pest and the property, not a one size spray
  • Gaps and entry points are shown to you, and closed on the day where it makes sense
  • You get a job sheet listing what was used and where it went
  • A written warranty, with the period printed on your job sheet
  • The price we agree on the phone is the price you pay, unless you add work
Quick answer

Do I need borer treatment, or is the damage old?

Borer treatment Melbourne homes need only when the borer is still active, which shows as fresh, pale dust under clean round holes, so we confirm activity first and then treat the affected timber.

Many older Melbourne homes carry holes from borer that died out decades ago. Dark, dirty holes with no new dust usually mean old damage. Pale powder that keeps appearing on the floor, in the subfloor or below furniture means the larvae are still feeding inside the timber, and that is when treatment is worth it.

  • Common pestfurniture beetle
  • Main signfresh fine dust
  • Wherepine floors and subfloors
  • Step oneconfirm it is active
Larval tunnels exposed in a piece of softwood timber damaged by borer
Know the pest

The furniture beetle: a slow, hidden timber pest

The wood borer most Melbourne homes deal with is the common furniture beetle. The adult is a small brown beetle you rarely notice. It lays eggs in cracks in bare pine and other softwood, and the larvae spend two to three years tunnelling through the timber before they chew their way out, leaving a round hole about one to two millimetres wide.

Because the larvae work inside the wood, the damage builds quietly for years. Baltic pine floorboards, subfloor joists and bearers, older pine furniture and roof framing are the usual targets, especially where the subfloor is damp and the air does not move. The first sign is often fine powder, called frass, collecting under the holes.

  • Round holes. about one to two millimetres, in bare softwood
  • Fine dust. pale frass that keeps reappearing
  • Weak timber. boards that feel soft or crumble at the edges
Wood borer control

What our wood borer treatment includes

A borer job is about the timber, the conditions under the house and making sure the next generation does not take hold.

  • 01

    Confirm and map

    We check whether the borer is active and mark which boards, joists and bearers are affected, so only the right timber is treated.

  • 02

    Treat the timber

    Bare timber surfaces in the subfloor or roof void are treated with a residual timber product that soaks in and stops emerging beetles laying again.

  • 03

    Fix the cause

    We point out damp, poor airflow and timber touching soil. Drier timber is far less attractive to borer, so this matters as much as the treatment.

Older Melbourne terrace house with a picket fence and timber floors
Older homes

Why period homes in Melbourne see borer most

Victorian and Edwardian homes, older weatherboards and many 1950s houses were built with softwood floors and framing that now have decades of exposure behind them. Add a low, damp subfloor and you have the conditions the furniture beetle likes. We often find borer on one side of a house where drainage is poor, and none on the other.

Polished floors are treated from underneath, because the finish on top stops a treatment soaking in. Where boards or joists are badly weakened, we tell you so a carpenter can replace them. We also check for termites while we are under the floor, since the two are easy to confuse and need very different treatment.

  • From below. polished boards are treated through the subfloor
  • Honest advice. badly weakened timber flagged for replacement
  • Termite check. we look for termite activity at the same time
How it works

How a borer treatment works

Clear steps from the first call to treated timber.

  1. Tell us what you see

    Holes, dust, soft boards. Photos of the holes and any powder help us work out if it is active.

  2. Confirm it is active

    We check the timber and map the affected areas before recommending any treatment.

  3. Treat the timber

    Affected bare timber in the subfloor or roof void is treated. Keep clear of the area for a few hours.

  4. Watch and record

    Some beetles may still emerge next season. That is normal, and your warranty is on your job record.

Questions

Borer Treatment Melbourne: your questions

What homeowners ask us about borer in floors, subfloors and furniture.

01How do I know if borer is still active?

Look for fresh, pale powder under the holes that comes back after you vacuum it, and holes with clean, light coloured edges. Dark holes with no new dust are usually old damage from borer that has long gone. We confirm activity before we recommend treatment.

02How much does borer treatment cost?

It depends on how much timber is affected and how easy the subfloor or roof void is to reach. One room of floorboards and a whole house are very different jobs, so we price your borer treatment on the phone or after a quick look.

03Is borer the same as termites?

No. Borer larvae tunnel through timber and leave small round holes and fine dust. Termites travel in mud tubes from the soil and hollow timber out from the inside. They need very different treatment, see termite control.

04Can you treat polished floorboards?

Yes, usually from underneath. The finish on top of polished boards stops treatment soaking in, so we treat the bare timber from the subfloor. That leaves your floors untouched and reaches the joists and bearers at the same time.

05Will I still see beetles after the wood borer treatment?

Possibly for a season. Larvae already deep inside the timber can take time to emerge, and they meet the treatment as they chew out. Fewer new holes and no fresh dust over the following year is the sign it is working.

06Can furniture be treated?

Old pine furniture with active furniture beetle can be treated if the timber is bare, such as the back or underside. Polished or painted surfaces block treatment. Keep affected pieces away from other timber until they have been looked at.

07What stops borer coming back?

Dry timber. Good subfloor airflow, fixed leaks, clear vents and soil kept away from timber make floors far less attractive. We point out what we find under your home so you can fix the causes along with the treatment.

08Do I need to leave the house?

Usually not. Most borer work happens in the subfloor or roof void. Keep people and pets out of the treated area for a few hours, commonly two to four, and your technician tells you the exact time for your job.

Areas we cover

Borer treatment across Melbourne

From inner city terraces to older weatherboards in the suburbs. Pick your region to see the suburbs we visit most.

Is my suburb covered?
  • Coburg
  • Brunswick
  • Preston
  • Reservoir
  • Thornbury
  • Northcote
  • Bundoora
  • Epping
  • Craigieburn
  • Broadmeadows
  • Glenroy
  • Pascoe Vale
  • Mill Park
  • South Morang

Fresh dust under the floor? Let us check it.

Call now for your price, or send the form and we call you back to book a time, 7 days.

Call 0477 559 658
  • Same day where we have a slot
  • Price agreed before we start
  • Written warranty on every job
Call 7 days0477 559 658
Scroll to Top